Full-Repair.comI'm sorry for not perfect english. In time I'll do a good quality translate. If you could not get anything please feel free to contact me in comments. I will answer you as soon as possible.
On the tablet Sony Xperia Z cracked screens, so much so that the sensor stopped working. Should be changed. About it and write.
When disassembling to replace the screen will not be unscrewed, no screw. We need to remove the back cover. It rests only on the double sided tape. Podkovyrivaem cover and disconnect the perimeter of the tape. If heated, it will go easier.
Cover removed-Disconnect the battery. In the pictures above and below it is already disabled. Connector is removed upwards.
Before removing the screen turns off loops of the LCD screen (circled in green) and a loop sensor (circled in red).
proceed to the removal of the screen
Again, no screws. Screen simply glued to the tape. To remove the screen without the need to damage his warm and very carefully tear off. In this case, the screen was removed from the irreversible changes in the form of a pile of debris. If otkovyrivat sensor carefully, the LCD screen can be left completely intact.
Screen shot-you can install the new, which you can order on aliexpress. The screen was commissioned original.
Double-sided adhesive tape was not, but there was a clear sealant. Owner experimental apparatus did not see absolutely nothing wrong in setting up the screen in the sealant. Tablet after all waterproof!
Flatten sealant in places of contact with the body, remove the excess. Threading loop sensor in its opening screen is pasted to the body.
