Main → How to Disassemble → How to Disassemble auto parts → How to Disassemble ABS Unit ↓

How to Disassemble ABS Unit


Views: 11243

It looked like a block initially, after loosening the mounting screws:

The initial view of the ABS unit Getz
The initial view of the ABS unit Getz

Next look at this same block that has already been dismantled. Let us examine it again.

The block together with the fastener.

ABS unit with a fastener

Unplug the connector from the block.

ABS unit with a fastener
ABS unit with a fastener

Remove the mounting bracket.

Blok from Getz
Blok from Getz
Blok from Getz

Open the back cover.

back cover of the ABS unit removed
Mikroskhemy block ABS
Mikroskhemy block ABS
Mikroskhemy block ABS
Mikroskhemy block ABS
Mikroskhemy block ABS
diodes and transistors ABS unit
Solenoidy block ABS
Solenoidy block ABS

Motor cover held by two screws, and sealant. Otkovyrivaem unscrew the screws and cover.

Here it is-the motor brakes.

Motor ABS Hyuindai Getz
Motor ABS Hyuindai Getz
Motor ABS Hyuindai Getz
Motor ABS Hyuindai Getz
Motor cover ABS Hyuindai Getz

Serve it 12 volts ... it works. But the bloc has decided that it is not. Come on-let's see how it is powered.

By metallic conductors that the cover has been found that the motor is supplied via the FET.

Check the transistor sued him voltage and measure the resistance. The transistor opens correctly, is an electronic circuit encapsulated ... So she stopped to give the control voltage to the gate of the transistor. There's nothing you can do about it. Have to change the unit, as I do not think that really anywhere to find this pattern.

Was the information helpful or interesting?

8
13

Share with friends:


Also you may subscibe to «Do it Yourself Technics Repair» to get the updates to your e-mail


Look at other articles at this section: